Hi I'm trying to find out if it is possible to reopen a FluoroSpot plate data file in the Mabtech software after you have already read and saved the plate file but then closed down the software? Do you have to re-read the plate in order to look at the plate data in the Mabtech software again? Thanks!

Hi Sarah,



	Yes ofcourse this is possible. Click on Open button in the top banner and then make yourself to the plate you want to open using windows File Explorer. 



	Once you have found the plate go into the folder and click on Select Folder at this stage:



	<a class="ipsAttachLink ipsAttachLink_image" href="//media.invisioncic.com/d244236/monthly_2023_06/image.png.6bc355705f5cdf0aea3a85e0f395853e.png" data-fileid="244" data-fileext="png" rel=""><img class="ipsImage ipsImage_thumbnailed" data-fileid="244" data-ratio="56.20" data-unique="oac2ewlpm" width="1000" alt="image.png" src="//media.invisioncic.com/d244236/monthly_2023_06/image.thumb.png.31e159cc457ca5eb340f9110f6523183.png"></a>

Forums

Reopening data file in Mabtech software